F-DPU100 Distributed Processing Unit User Manual
Xiamen Four-Faith Communication Technology Co.,Ltd.
Page 18 of 86
Add: 11th Floor,A-06 Area,No.370,Chengyi Street,Jimei,Xiamen,Fujian,China. 361021
Web: en.four-faith.com
Tel: +86-592-5907276 / 5907277
Fax: +86-592-5912735
Chapter 3 Configuration and Management
This chapter describes how to configure and manage the F-DPU100.
3.1 Configuration Connection
Before configuration, you should connect the F-DPU100 and your configuration PC with the
supplied network cable. Plug the cable’s one end into the Local Network port of the F-DPU100,
and another end into your configure PC’s Ethernet port. The connection diagram is as following:
Please modify the IP address of PC as the same network segment address of the F-DPU100,
for instance, 192.168.4.9. Modify the mask code of PC as 255.255.255.0 and set the default
gateway of PC as the F-DPU100’s IP address (192.168.4.1).
3.2 Access the Configuration Web Page
The chapter is to present main functions of each page. Users visit page tool via web browser
after connect users' PC to the F-DPU100. There are eleven main pages: Setting, Wireless, Service,
VPN, Security, Access Restrictions, NAT, QoS Setting, Applications, Management and Status.
Users enable to browse slave pages by click one main page..
Users can open IE or other explorers and enter the F-DPU100's default IP address of
192.168.1.1 on address bar, then press the botton of Enter to visit page Web management tool of
the F-DPU100. The users login in the web page at the first name, there will display a page shows
as blow to tip users to modify the default user name and password of the F-DPU100. Users have
to click "change password" to make it work if they modify user name and password.
