Foundry Networks Switch and Router, Руководство по установке и настройке

Страница: 978 / 1070

Foundry Switch and Router Installation and Configuration Guide
25 - 58 December 2000
9. Select the virtual interface (router interface) if applicable.
10. Click the Select Port Members button to display the following panel.
11. Select the ports you are placing in the VLAN. To select a row, click on the checkbox next to the row number,
then click on the Select Row button.
NOTE: Ports highlighted in grey are members of a trunk group. The port right before the grey ports is the
master port for that trunk group.
12. When you finish selecting the ports, click on the Continue button to return to the Port VLAN configuration
dialog.
13. Click the Add button (to add a new VLAN) or the Modify button (if you are modifying an existing VLAN) to save
the change to the device’s running-config file.
14. Select the Save link at the bottom of the dialog, then select Yes when prompted to save the configuration
change to the startup-config file on the device’s flash memory.
Configuring a Protocol-Based VLAN
This procedure describes how to configure a protocol-based VLAN. To configure an IP sub-net VLAN, IPX
network VLAN, or AppleTalk cable VLAN, se the sections following this one.
1. Log on to the device using a valid user name and password for read-write access.
2. Click on the plus sign next to Configure in the tree view to expand the list of configuration options.
3. Click on the plus sign next to VLAN in the tree view to expand the list of VLAN option links.
4. Click on the Protocol link.
• If the device does not have any protocol VLANs, the Protocol VLAN configuration panel is displayed, as
shown in the following example.
• If at least one protocol VLAN is already configured and you are adding a new one, click on the Protocol
link to display the Protocol VLAN configuration panel.
• If you are modifying an existing protocol VLAN, click on the Modify button to the right of the row
describing the VLAN to display the configuration panel for the type of VLAN you are modifying. The
following example shows the Protocol VLAN configuration dialog, used for configuring a protocol VLAN
(not an IP sub-net, IPX network, or AppleTalk cable VLAN).