manualshive.com logo in svg

Foundry Networks Switch and Router, Руководство по установке и настройке

Поделиться
Скачать
Foundry Networks Switch and Router Скачать руководство пользователя страница 466

Foundry Switch and Router Installation and Configuration Guide

15 - 24

December 2000

6.

Select the Save link at the bottom of the dialog.  Select Yes when prompted to save the configuration change 
to the startup-config file on the device’s flash memory.

Using a DNS Name To Initiate a Trace Route

Suppose you want to trace the route from a Foundry Layer 3 Switch to a remote server identified as NYC02 on 
domain newyork.com.  Because the newyork.com domain is already defined on the Layer 3 Switch, you need to 
enter only the host name, NYC02, as noted below.

USING THE CLI

BigIron# traceroute nyc02 

Syntax: 

traceroute <host-ip-addr> [maxttl <value>] [minttl <value>] [numeric] [timeout <value>] 

[source-ip <ip addr>]

The only required parameter is the IP address of the host at the other end of the route.  See the 

Foundry Switch 

and Router Command Line Interface Reference

 for information about the parameters.

After you enter the command, a message indicating that the DNS query is in process and the current gateway 
address (IP address of the domain name server) being queried appear on the screen:

Type Control-c to abort

Sending DNS Query to 209.157.22.199

Tracing Route to IP node 209.157.22.80

To ABORT Trace Route, Please use stop-traceroute command.

 Traced route to target IP node 209.157.22.80:

   IP Address          Round Trip Time1    Round Trip Time2

  207.95.6.30         93 msec             121 msec

NOTE:

In the above example, 209.157.22.199 is the IP address of the domain name server (default DNS 

gateway address), and 209.157.22.80 represents the IP address of the NYC02 host.

USING THE WEB MANAGEMENT INTERFACE

1.

Log on to the device using a valid user name and password for read-only or read-write access.  The System 
configuration panel is displayed.

2.

Click on the plus sign next to Command in the tree view to list the command options.

3.

Select the Trace Route link to display the Trace Route panel.

4.

Enter the host name or IP address in the Target Address field.

NOTE:

You can use the host name only if you have already configured the DNS resolver for the domain that 

contains the host.

5.

Optionally change the minimum and maximum TTLs and the Timeout.

6.

Click on Start to begin the trace.  The trace results are displayed below the Start and Abort buttons.

Configuring Packet Parameters

You can configure the following packet parameters on Layer 3 Switches.  These parameters control how the Layer 
3 Switch sends IP packets to other devices on an Ethernet network.  The Layer 3 Switch always places IP packets 
into Ethernet packets to forward them on an Ethernet port.

•

Encapsulation type – The format for the Layer 2 packets within which the Layer 3 Switch sends IP packets.

•

Maximum Transmission Unit (MTU) – The maximum length of IP packet that a Layer 2 packet can contain.  IP 
packets that are longer than the MTU are fragmented and sent in multiple Layer 2 packets.

Содержание Switch and Router















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды