6
(Unit: mm)
Switches and buttons on the front of the unit
1 [INPUT] switch
Select the input (analog or Dante) to monitor.
The unit will automatically store the switch status within approximately three
seconds.
Indicator
Status
Analog input
Dante input (Synchronized to Dante input signal)
Dante input (Synchronized as clock master)
Dante input (Desynchronized)
<Caution>
(LR alternate yellow lighting/red blinking)
This indicates reboot request status.
When the Dante module of this unit have been upgraded using the
Dante controller, confirm the above indication, and turn the power off
and then on to apply the new firmware.
Since rebooting cannot be commanded from the Dante controller, it
is necessary to manually turn the power of the unit off and then on to
apply the new firmware.
2 [OUTPUT] switch
Select the output channel.
The unit will automatically store the switch status within approximately
three seconds.
Indicator
Status
Stereo
L
R
L
L
L
R
R
R
Monaural (L+R)
L+R
L+R
3 Mute button
Press the mute button for approximately one second to mute the unit.
When in mute, briefly press the mute button again to return to the
normal state.
The unit is never muted (sound can be heard) when it is turned on.
Dimensions
482
44
284
260
26
430
RM-3DT.indb 6
RM-3DT.indb 6
2020/11/20 10:58
2020/11/20 10:58
