Foster FX Blast Chiller, Руководство по обслуживанию

Страница: 4 / 20

Controller operation
Prior to starting a chill operation ensure the controller is in the ‘stand-by’ mode.
Timed chill operation
To place the controller in ‘stand–by’ press for 2 seconds, whilst in stand-by the cabinet internal air
temperature will be displayed intermittently.
Press ‘ PoS ’ will be displayed and the Timed Chilling LED will be flashing.
Press to display the chilling time, set to 90 minutes as standard, if no change to the time is required press
to start the programme.
If changes to the chill time are required press ‘ PoS ’ will be displayed and the Timed Chilling LED
will be flashing, press to display the chilling time followed by to decrease the time or to
increase.
During chilling the display will show the time remaining with the Timed Chilling LED on.
Once the chilling time is completed the controller switches to the storage mode with the display showing ‘End’ press
any button to mute the alarm, press to cancel the message.
Whilst the cabinet is in the storage mode the internal cabinet temperature will be displayed and the Timed Chilling LED
and Storage LED will be illuminated.
To stop the programme press for 2 seconds
NOTE:
If changes are made to the time settings on completion of the programme the time will revert back to the default setting
of 90 minutes.
Temperature chill operation
Place the controller in ‘stand–by’ pressing for 2 seconds.
Ensure that the food probe is inserted into the product prior to commencing the temperature chill programme.
3
Press ‘ PoS ’ will be displayed and the Timed Chilling LED may be flashing, if it is Press
again to display Set-Temperature Chilling LED flashing.
Press the display will show the product end temperature, +3ºC as standard, if no change to the temperature
is required press to start the programme.
If changes to the chill termination temperature are required press ‘ PoS ’ will be displayed and the Set-
Temperature Chilling LED will be flashing, press to display the chilling temperature followed by
to decrease the temperature or to increase.
Once the product temperature has been achieved the controller switches to storage mode with the display showing
‘End’ press any button to mute the alarm, press to cancel the message.
Whilst the cabinet is in the storage mode the internal cabinet temperature will be displayed and the Set-
Temperature Chilling LED and Storage LED will be illuminated.
To stop the programme press for 2 seconds
NOTE:
If changes are made to the temperature settings on completion of the programme the temperature will revert back to
the default setting of +3ºC.