35
ENGLISH
USER INSTRUCTIONS
The upper cover (B) of the burners must be placed in opposite seat with the two intro-
ductions notches in correspondence of the two cylinders below (C) and tighten clock-
wise.
The associated burner is indicated near each knob.
The appliance is equipped with an electric ignition
device. It is sufficient to press the knob and rotate it
anti-clockwise to the maximum flame symbol, until
it is lit. If it does not ignite within the first 15 sec-
onds, bring the knob on
[chiuso] (closed)
and do not try to re-ignite for 60 seconds.
Once it is lit, keep the knob pressed for a few sec-
onds in order for thermocouple to heat up. It is
possible that the burner shuts off when the knob
is released: this means that the thermocouple was
not sufficiently heated. Wait a few seconds and re-
peat the operation, keeping the knob pressed for a
little longer. Once the burner is lit, it is possible to
adjust the flame based on need.
OFF
MAX
MIN
Fig. 11:
standard burner knob
CHIUSO
MAX 1
MAX 2
MAX 1
MIN 2
MAX 1
CHIUSO 2
MIN 1
CHIUSO 2
Fig. 12:
burner knob
dual (S4000)/dual gear
CHIUSO
1 MAX
2 CHIUSO
1 MIN
2 CHIUSO
1 MAX
2 MAX
1 MIN
2 MIN
Fig. 13:
burner knob
dual (GIOTTO/VULCANO)
After every use of the hob, always verify that the
control knobs are in
[chiuso] (closed)
posi-
tion.
If the burners were to shut off accidentally, after
about 20 seconds a safety device intervenes and
blocks gas output, even when the tap is open. In
this case bring the knob to
[chiuso] (closed)
position and do not try to light the burner for at
least 60 seconds.
USER INSTRUCTIONS
1 INSIDE BURNER
2 EXTERNAL CROWNS
1 INSIDE BURNER
2 EXTERNAL CROWNS
