Foss OMC-W36, Руководство пользователя

Страница: 4 / 22

PLEASE OBSERVE THE FOLLOWING INSTRUCTIONS:
•
NEVER touch or put your hands or fingers on the ferrule/plug cassette block
while the heating process has been started or interrupted. Actual temperature
of the ferrule cassette is indicated on the LCD display. Touching the hot
ferrule/plug cassette may result in serious injury.
• NEVER detach the cassette from the tray immediately after finishing the
heating process. Allow enough time for it to cool. Actual temperature of the
ferrule cassette after finishing or interrupting the heating process is indicated
on the LCD display.
• NEVER touch the control panel or electrical cord with wet or damp body parts
as it may cause severe shock or injury.
• NEVER remove the bottom cover of the unit while main power plug is
connected to electricity. Opening the unit may cause electric shock, severe
injury, flash burn or death.
• ALWAYS use the unit at the rated voltage, as indicated on rear panel, above
the inlet plug. As the unit requires proper grounding use 3-wire plug cord with
a Type 3 or better grounding.
• ALWAYS turn off the power and unplug the power cord from the outlet in the
event of the following:
-
changing the fuse
-
any strange smells, sounds or smoke arise from the unit
-
the unit does not correctly respond to the commands indicated on LCD
display
-
temperature of the curing process rises far above the preset
temperature (by more than 10°C)
• ALWAYS close the protective closure before starting the heating process. Do
not touch the cassette and ensure the protective cover remains closed during
the heating process
WARNING
CAUTION
!
!