31
INSPIRE RAILING INSTALLATION
Fig. 82
Step 3:
Attach Panel To Brackets
1. Pre-drill holes for screws using a 3/16” [5mm] drill bit.
2. Push the bracket up so that the bottom face is parallel with
the bottom face of rail. As shown in Fig. 83.
3. Attach the panel to brackets using the T-25 thread-cutting
screws
that came with the brackets. Two screws are
required in each bracket. As shown in Fig. 84.
4. Remove any metal shavings after attaching the panel.
Fig. 83
Fig. 84
Step 4:
Mount I-Support To Deck Surface
1. Unscrew the base until it reaches the stair surface. As
shown in Fig. 85.
2. Install the I-Support using the provided wood screw. As
shown in Fig. 86. Pre-drill screw hole with a 1/16” [2mm]
drill bit.
Note:
• The I-Support can rotate to any angle 0° to 38°. The
height of the I-Support can change from 3.3” [84mm] up to
5.7” [145mm].
