17
INSPIRE RAILING INSTALLATION
Fig. 41
A
B
A
C
*Dimension A positions bottom edge of rail 3-1/2” [89mm] above deck surface.
*Dimension A is measured from the bottom surface of post base.
Fig. 40
Angle Adapter Bracket Hole Locations
Pre-drill Dimensions: Pre-drilling with a 3/16” [5mm] drill bit is required
36” [914mm] Panel
B
35-3/16” [894mm]
C
3/4” [19mm]
A*
4-1/8” [105mm]
Step 2:
Pre-drill Angle Bracket Holes
Tip:
• It’s important to double check dimensions to confirm
accuracy of bracket hole locations before drilling.
1. Use Spring Punch to mark the holes. As shown in Fig. 42.
2. Pre-drill bracket holes with a 3/16” [5mm] drill bit.
As shown in Fig. 43.
3. Remove the bolt from the Angle Bracket Assembly.
Fig. 43
Fig. 42
Pre-Drill
with a 3/16”
[5mm]
drill bit
Cen
ter of P
os
t
3/4”
[19mm]
