26
INSPIRE RAILING INSTALLATION
Step 5:
Top Bracket Installation Continued
1. Use Spring Punch to mark the holes.
As shown in Fig. 64.
2. Drill out holes with a 3/16” [5mm] drill bit.
As shown in
Fig. 65.
3. Use T-25 Thread-Cutting Screws to reattach the base of the
top rail bracket
to the post.
4. Insert barrel & screw to re-assemble bracket.
5. Tighten barrel & screw. As shown in Fig. 66.
Fig. 64
Fig. 65
Fig. 66
BOTTOM POST MOUNTING
Step 1:
Mark Bottom Post Mounting Location
1. Position
wood
2” x 4” (actual 1-1/2” [38mm] x 3-1/2”
[89mm])
between the mounted top post and the
unmounted bottom post. As shown in Fig. 67.
2. Fully rake and place panel next to posts on top of
wood
2”
x 4” (actual 1-1/2” [38mm] x 3-1/2” [89mm]).
