FENCING INSTALLATION: EVOLVER
11
STEP 3.
Slide rail supports into place.
Rail supports are supplied in several lengths, that can be cut to size to accommodate the
changing levels in your terrain, and can even be stacked on top of each other.
No other fastening is needed for these, as the weight of the boards will hold them in place
Installation Guide - 2017 6
RAIL & FENCE BOARD INSTALLATION
Required Components:
• Top Rails
• Bottom Rails
• Intermediate Rails
• Side
Rail Supports
• Fasteners
• Locking Clips
• Fence Boards
• Post Caps
• Post Cover Sliders
Step 1:
Install Side Rail Supports
1. Slide Side Rail Supports into the Post Slots.
As shown in Fig. 1.
Note:
• Side Rail Supports are supplied in several lengths, that
can be cut to size to accommodate the changing
levels in your terrain, and can even be stacked on
top of each other.
• No other fastening is needed.
Fig. 1
Step 2:
Install Post Cover Sliders
1. Place Post Cover
Sliders into slots where Fence Boards are
not needed. As shown in Fig. 1.
Cut Side Rail
Support To Size
Top View
