Fortress Building Products FortressAccents, Руководство по установке

Страница: 26 / 32

26
FORTRESSACCENTS INSTALLATION: PLUG AND PLAY
Step 1: Install Post Base Cover
1. Separate the two-piece base plate cover. Hold one side
parallel to the post base plate. As shown in Fig. 58.
2. Place 2nd half of the post base cover on the opposite side
of the post. Hold 2nd piece slightly under the 1st piece. As
shown in Fig. 59.
3. Twist the 2nd cover ¼ turn and move piece until both half’s
touch. As shown in Fig. 60.
4. Make sure one of the locking pins on the 2nd cover engage
with the proper slot on the 1st cover piece. As shown in
Fig. 61.
5. Once the first locking pin is started, turn the 2nd cover
piece back parallel to the post base plate. One you have
confirmed both locking pins have engaged with the
opposing slots lower both half’s over the post base plate.
As shown in Fig. 62.
INSTALLATION: SCREW-LESS POST BASE COVER (2” [51mm] & 3”
[76mm] POSTS)
Fig. 58 Fig. 59
Fig. 60 Fig. 61