Fortress Building Products FortressAccents, Руководство по установке

Страница: 14 / 32

14
FORTRESSACCENTS INSTALLATION: PLUG AND PLAY
Fig. 21
Step 2: Connect Light Wire To LED Cap Light Kit Wire
1. Connect wires by using a FA - PNP Female-To-Female
Connector. As shown in Fig. 22. Wire connections can also
be made below the deck surface.
2. Once connected, tuck excess wires into post.
Fig. 22
Step 3: Mount LED Cap Light Kit
1. Insert each LED Cap Light into a slot hole on the Post Cap
Base with the LED’s facing down. As shown in Fig. 23.
2. Secure the LED Cap Light Kit with provided screw. As
shown in Fig. 24.
Tip:
• If a slot hole in the Post Cap Base will not be used to emit
light, mount the appropriate Cap Light flipped upside down
with the light facing up. As shown in Fig. 25. This will allow
the slot hole to be covered while also stop the Cap Light
from emitting light.
Fig. 20
FA - PNP
Female-To-Female
Connector