Step Four
Connect the handle bar (6) to the frame for the seat mat (9)
tightly by using a bolt (44), washer (23) and the cover screw
(20). Connect the pulse flake wire (26) to the pulse relay wire
(21).
Step Five
Connect the left and right pedals (11 L/R) to the left and right
cranks (10 L/R) tightly.
Note: The left pedal (11L) is screwed in counter-clockwise, while
the right pedal (11R) is screwed in clockwise.
Step Six
Pull the tension control wire (27) out from the vertical tube (4).
Connect the pulse relay wire (28) to the other pulse relay wire
(33). Likewise, connect the sensor wire (29) to the other sensor
wire (34).
Connect the vertical tube (4) to the main frame (1) by using a
hexagon pan head screw (22) and an arc washer (19).
Step Seven
Connect the tension controller (30) with the tension
control wire (27), as shown to right. Then connect the
tension controller to the vertical tube (4) tightly, using
the hexagon pan head screw (32) and arc washer (31).
Put the handle bar (12) into the clamp of the vertical
tube (4). Adjust the angle, then connect the handle
bar (12) to the vertical tube (40), using the plastic
hand screw bar (40), single-hole clamp (39), cover
(38) and washer (23).
Attention: Loosen the plastic hand screw bar (40)
appropriately, then adjust the angle of the the handle
bar (12) as required.
5
Содержание FSRCMBIK1XA
Страница 1: ......
