manualshive.com logo in svg

Fortinet FortiSwitch-5003B, Системное руководство

Поделиться
Скачать
Fortinet FortiSwitch-5003B Скачать руководство пользователя страница 6

FortiSwitch-5003B system

FortiSwitch-5003B System Guide

6

01-400-134822-20120216

http://docs.fortinet.com/

 

Figure 1: FortiSwitch-5003B front panel

A FortiSwitch-5003B board in hub/switch slot 1 provides communications on fabric 
channel 1 and base channel 1. A FortiSwitch-5003B board in hub/switch slot 2 provides 
communications on fabric channel 2 and base channel 2. If your chassis includes one 
FortiSwitch-5003B board you can install it in hub/switch slot 1 or 2 and configure the 
FortiGate-5000 boards installed in the chassis to use the correct fabric and base 
backplane interfaces.

For a complete 10-gigabit fabric backplane solution you must install FortiGate-5000 
hardware that supports 10-gigabit connections. For example:

• FortiGate-5001B boards include 10-gigabit fabric backplane interfaces. You can 

install the FortiGate-5001B boards in chassis slots 3 and up.

• FortiGate-5001A boards must be combined with FortiGate-RTM-XB2 or FortiGate-

RTM-XD2 modules to support 10-gigabit fabric interfaces. You can install the 
FortiGate-5001A boards in chassis slots 3 and up and FortiGate-RTM-XB2 or 
FortiGate-RTM-XD2 modules in the corresponding RTM slots on the back of the 
chassis. 

The FortiSwitch-5003B board includes the following features:

• One 1-gigabit base backplane channel for layer-2 base backplane switching between 

FortiGate-5000 series boards installed in the same chassis as the FortiSwitch-5003B 
board. The base backplane channel includes 13 1-gigabit connections to up to 13 
other slots in the chassis (Slots 2 to 14 if the FortiSwitch-5003B board is installed in 
slot 1. Slots 1 and 3 to 14 if the FortiSwitch-5003B board is installed in slot 2.).

• One 10-gigabit fabric backplane channel for layer-2 fabric backplane switching 

between FortiGate-5001B boards installed in the same chassis as the 
FortiSwitch-5003B board. The fabric backplane channel includes 13 10-gigabit 
connections to up to 13 other slots in the chassis (Slots 2 to 14 if the 
FortiSwitch-5003B board is installed in slot 1. Slots 1 and 3 to 14 if the 
FortiSwitch-5003B board is installed in slot 2.). 

By default, FortiSwitch-5003B boards with part numbers lower than P11000-01 could 
not connect to the 14th fabric channel slot interface without deactivating the F8 front 
panel interface. See 

“Disabling the front panel F8 interface and enabling the slot-14 

fabric interface” on page 33

.

• Two front panel base backplane 10-gigabit SFP+ interfaces (B1 and B2) that connect 

to the base backplane channel. These interfaces can also be configured to operate as 
1-gigabit SFP interfaces.

1/2 to 14 Base Network

Activity LEDs

1/2 to 14 Fabric

Network Activity  LEDs

Extraction

Lever

Retention

Screw

Extraction

Lever

Retention

Screw

OOS
LED

STA
LED

PWR
LED

ACC
LED

F1 to F8

10 Gig Fibre Channel

SFP+ Interfaces

B1 and B2

10 Gig Base Channel

SFP+ Interfaces

MGMT

10/100/1000 Copper

Management Interface

Factory Use

RJ-45

Console

IPM

LED

(board

position)

Содержание FortiSwitch-5003B





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды