Hardware installation
Shutting down and removing a FortiSwitch-5003B board
FortiSwitch-5003B System Guide
01-400-134822-20120216
25
http://docs.fortinet.com/
6
Keep the handles in this position until the IPM LED stops flashing and becomes solid
blue.
7
Open the handles to their fully open positions.
Opening the handles turns off the microswitch, turns off all LEDs, and ejects the board
from the chassis slot. You need to use moderate pressure on the handles to eject the
board.
8
Pull the board about half way out.
9
Turn both handles to their fully-closed positions.
When the handles are fully-closed they lock into place.
10
Carefully slide the board completely out of the slot.
11
Re-attach the protective metal frame if you are going ship the FortiSwitch-5003B
board or store it outside of a chassis.
Waiting for the IPM LED to change to solid blue makes sure that the board software
shutdowns completely before disconnecting it from backplane power.
To avoid damaging the lock, make sure you squeeze the handles fully to unlock them
before opening. The handles should pop easily out of the board front panel.
Handle
Alignment Pin
Open
Alignment Pin
Lock
Handle
Fully Closed
and Locked
Alignment Pin
Handle
Close
Alignment Pin
Handle
