Fortinet FortiGate 60M страница 60 Скачать руководство пользователя

Страница: 60 / 64

01-28008-0111-20050128

Fortinet Inc.

Connecting and disconnecting the modem in Standalone mode

Configuring the modem interface

You can configure and use the modem in NAT/Route mode only.

To configure modem settings

Go to

System > Network > Modem

Select Enable Modem.

Change any of the following dialup connection settings:

Enter the following Dialup Account 1 settings:

If you have multiple dialup accounts, enter Phone Number, User Name, and Password
for Dialup Account 2 and Dialup Account 3.

Select Apply.

Connecting and disconnecting the modem in Standalone mode

To connect to a dialup account

Go to

System > Network > Modem

Select Enable Modem.

Make sure there is correct information in one or more Dialup Accounts.

Select Apply if you make any configuration changes.

Dial on demand

(Standalone mode only) Select to dial the modem when packets are

routed to the modem interface. The modem disconnects after the idle

timeout period. You cannot select Dial on demand if Auto-dial is

selected.

Idle timeout

(Standalone mode only) Enter the timeout duration in minutes. After this

period of inactivity, the modem disconnects.

Holddown
Timer

(Redundant mode only) Enter the time (1-60 seconds) that the

FortiGate unit waits before switching from the modem interface to the

primary interface, after the primary interface has been restored. The

default is 1 second. Configure a higher value if you find the FortiGate

unit switching repeatedly between the primary interface and the modem

interface.

Redial Limit

The maximum number of times (1-10) that the FortiGate unit modem

attempts to reconnect to the ISP if the connection fails. The default

redial limit is 1. Select None to have no limit on redial attempts.

Dialup Account

Configure up to three dialup accounts. The FortiGate unit tries

connecting to each account in order until a connection can be

established.

Phone Number

The phone number required to connect to the dialup account. Do not

add spaces to the phone number. Make sure to include standard special

characters for pauses, country codes, and other functions as required

by your modem to connect to your dialup account.

User Name

The user name (maximum 63 characters) sent to the ISP.

Password

The password sent to the ISP.

Содержание FortiGate 60M

































































Результаты поиска

Содержание FortiGate 60M

Отзывы:

Похожие инструкции для FortiGate 60M

Бренды по названию

Популярные бренды

Fortinet FortiGate 60M, Руководство по установке

Результаты поиска

Содержание FortiGate 60M

Отзывы:

Похожие инструкции для FortiGate 60M

Бренды по названию

Популярные бренды