Fortinet FortiGate 60M страница 15 Скачать руководство пользователя

Страница: 15 / 64

Getting started

Turning the FortiGate unit power on and off

FortiGate-60M Installation Guide

01-28008-0111-20050128

Power requirements

• DC input voltage: 12 V
• DC input current: 3 A

Environmental specifications

• Operating temperature: 32 to 104°F (0 to 40°C)
• Storage temperature: -13 to 158°F (-25 to 70°C)
• Humidity: 5 to 95% non-condensing

Turning the FortiGate unit power on and off

To power on the FortiGate unit

Connect the AC adapter to the power connection at the back of the FortiGate-60M
unit.

Connect the AC adapter to the power cable.

Connect the power cable to a power outlet.
The FortiGate-60M unit starts. The Power and Status LEDs are on.

To power off the FortiGate unit

Always shut down the FortiGate operating system properly before turning off the
power switch.

From the web-based manager, go to

System > Maintenance > ShutDown

, select

Shut Down and select Apply, or from the CLI, enter:

execute shutdown

Table 1: FortiGate-60M LED indicators

LED

State

Description

Power

Green

The FortiGate unit is powered on.

Off

The FortiGate unit is powered off.

Status

Green

The FortiGate unit is starting up.

Off

The FortiGate unit is running normally.

Link

(Internal
DMZ
WAN1
WAN2)

Green

The correct cable is in use and the connected
equipment has power.

Flashing Green

Network activity at this interface.

Off

No link established.

100

(Internal
DMZ
WAN1
WAN2)

Green

The interface is connected at 100 Mbps.

Содержание FortiGate 60M

































































Результаты поиска

Содержание FortiGate 60M

Отзывы:

Похожие инструкции для FortiGate 60M

Бренды по названию

Популярные бренды

Fortinet FortiGate 60M, Руководство по установке

Результаты поиска

Содержание FortiGate 60M

Отзывы:

Похожие инструкции для FortiGate 60M

Бренды по названию

Популярные бренды