Fortinet FortiGate 60M, Руководство по установке

Страница: 7 / 64

Introduction Document conventions
FortiGate-60M Installation Guide 01-28008-0111-20050128
7
Command line interface
You can access the FortiGate command line interface (CLI) by connecting a
management computer serial port to the FortiGate RJ-45 serial console connector.
You can also use Telnet or a secure SSH connection to connect to the CLI from any
network that is connected to the FortiGate unit, including the Internet.
The CLI supports the same configuration and monitoring functionality as the
web-based manager. In addition, you can use the CLI for advanced configuration
options that are not available from the web-based manager.
This Installation Guide contains information about basic and advanced CLI
commands. For a more complete description about connecting to and using the
FortiGate CLI, see the
FortiGate CLI Reference Guide .
Setup wizard
The FortiGate setup wizard provides an easy way to configure the basic initial settings
for the FortiGate unit. The wizard walks through the configuration of a new
administrator password, FortiGate interfaces, DHCP server settings, internal servers
(web, FTP, etc.), and basic antivirus settings.
Document conventions
This guide uses the following conventions to describe command syntax.
• Angle brackets
< >
to indicate variables.
For example:
execute restore config <filename_str>
You enter:
execute restore config myfile.bak
<xxx_str>
indicates an ASCII string that does not contain new-lines or carriage
returns.
<xxx_integer>
indicates an integer string that is a decimal (base 10) number.
<xxx_octet>
indicates a hexadecimal string that uses the digits 0-9 and letters
A-F.
<xxx_ipv4>
indicates a dotted decimal IPv4 address.
<xxx_v4mask>
indicates a dotted decimal IPv4 netmask.
<xxx_ipv4mask>
indicates a dotted decimal IPv4 address followed by a dotted
decimal IPv4 netmask.
<xxx_ipv6>
indicates a dotted decimal IPv6 address.
<xxx_v6mask>
indicates a dotted decimal IPv6 netmask.
<xxx_ipv6mask>
indicates a dotted decimal IPv6 address followed by a dotted
decimal IPv6 netmask.
• Vertical bar and curly brackets
{|}
to separate alternative, mutually exclusive
required keywords.
For example: