Fortinet FortiAPCam-214B, Быстрый старт

Страница: 9 / 28

Page 9
5. Configure a static IP address for the FortiAPCam unit and netmask &
gateway information for your network, using the following commands:
cfg -a ADDR_MODE=STATIC
cfg –a AP_IPADDR=xxx.xxx.xxx.xx
cfg –a AP_NETMASK=255.255.255.0
cfg –a IPGW=yyy.yyy.yyy.yyy
cfg –a AC_IPADDR_1=zzz.zzz.zzz.zzz
where xxx is the IP address of the FortiAPCam unit, yyy is the
Gateway IP address and zzz is the IP address of the FortiGate
Wireless Controller.
6. Save the configuration by typing the following command:
cfg –c
7. Unplug the FortiAPCam unit and plug it back in order for the
configuration to take effect.
8.
Move the FortiAPCam to the intended deployment location and
connect the Ethernet cable.
9. Log in to the FortiGate controller Web-based Manager, and go to
WiFi & Switch Controller > Managed Devices > Managed FortiAPs . A
successfully discovered unit displays an orange circle with a question
mark in the
Status column.
10. Select the access point and click the Authorize button .
11.
In the
Edit FortiAP
dialog box, select
Enable Wireless Radio
. Leave
the remaining settings at their default values. The configuration is
downloaded from the FortiGate unit to the FortiAPCam device.
For more information, see the Deploying Wireless Networks Guide , available
on Fortinet’s technical documentation website, http://docs.fortinet.com .