Fortinet FortiAPCam-214B, Быстрый старт

Страница: 5 / 28

Page 5
Hardware Installation
Using the provided hardware, the FortiAPCam unit can be attached to a
ceiling.
To connect
1.
Fasten a single screw to the desired location on a ceiling and position
the unit so that the screw fits securely into the slot located in the
centre of the flat bottom of the unit.
2.
Secure unit to the ceiling by inserting screws through the three tabs
located along the edge of the unit.
3. Attach the dome over the unit and secure it in place using the two
screws located on either side of the dome.
To reboot
• Press and hold the Reset button for less than 5 seconds to reboot
both the camera and AP part of the system.
To reset to factory default settings
• Press and hold the Reset button for more than 5 seconds to reset
both the camera and AP part of the system to factory default.