Fortinet FortiAPCam-214B, Быстрый старт

Страница: 8 / 28

Page 8
In the FortiGate Web-based Manager, go to WiFi & Switch Controller
> Managed Devices > Managed FortiAPs
. A successfully discovered
unit displays an orange circle with a question mark.
4. Select the access point and click the Authorize button.
The configuration is downloaded from the wireless controller to the
FortiAP and the WiFi LED lights up.
To enable the FortiAPCam with a static IP address
1.
Connect the FortiAPCam device to a separate private switch or hub,
or directly connect it to your management computer via a cross-over
cable.
2.
Configure the management computer to be on the same subnet as
the internal interface of the FortiAPCam unit, which default IP address
is 192.168.1.2.
a. For example, in Windows 7, browse to the Network and
Sharing Center > Change Adapter Settings > Local Area
Connection Properties > Internet Protocol Version 4 (TCP/IPv4)
Properties
.
b. Change the IP address of the management computer to
192.168.1.3 and the netmask to 255.255.255.0.
3. Use a Telnet apllication to connect to IP address 192.168.1.2.
4. Type
admin
in the Name field, leave the Password field blank, and
press
Enter
.