Fortek Security Systems
Tel: 1-800-505-6476
www.forteksecurity.com
Fax: 1-866-655-6342
6
6 – Change controller reset key
The controller comes with a default 7 digits reset key ‘4812446’ used to reset the system to
manufacturer settings, and also used to reset the 4 digits security password to the default ‘1234’
(useful in cases where the security password is forgotten). This function allows to overwrite the
default reset key by setting up your unique and easy to remember 7 digits reset key.
A)
Press and hold the Escape key "ESC" until a double beep is heard.
The orange light will remain on to indicate you have entered into the programming mode.
B)
Enter the 4 digit security password – factory default:1234. The green light will blink twice if the
correct password was entered.
C)
Press key number five "5" to enter the "change controller reset key" command.
D)
Enter your new 7 digits reset key (0-9 digit allowed).
If the operation was successful, the system will beep twice and the green light will remain ON
for 3 seconds.
7 - Unlocked Mode
A)
Press and hold the Escape key "ESC" until a double beep is heard. The orange light will remain
on to indicate you have entered into the programming mode.
B)
Enter the 4 digit password. The green light will blink twice if the correct password was entered.
C)
Press key number six "6" to enter the "unlocked mode" command.
If the operation was successful, the system will beep twice and the green light will blink once and
remain ON indicating that door/s remain unlocked
8 - Locked Mode
A)
Press and hold the Escape key "ESC" until a double beep is heard. The orange light will remain
on to indicate you have entered into the programming mode.
B)
Enter the 4 digit security password – factory default:1234. The green light will blink twice if the
correct password was entered.
C)
Press key number seven "7" to enter the "locked mode" command.
If the operation was successful, the system will beep twice and the green light will remain ON for 3
seconds.
