Fortek Security Systems
Tel: 1-800-505-6476
www.forteksecurity.com
Fax: 1-866-655-6342
18
F)
To finish the operation press and hold the Escape key "ESC" until double beep is heard, the
orange and green light will be turn off indicating that the system exited the programming mode.
Note 1:
The last 4 digits printed on the credential are automatically stored into the system,
allowing future deletion or replacement if necessary. (Software provided to keep track of users and
assigned credentials)
Note 2:
Upon attempt to enrolling an already existent credential with the same authorized door
the light on the reader will remain green for 10 seconds and the controller will provide a warning
beeping 7 times.
3 - Delete a credential
A)
Press and hold the Escape key "ESC" until a double beep is heard. The orange light will remain
onto indicate you have entered into the programming mode.
B)
Enter the 4 digit security password – factory default:1234. The green light will blink twice if the
correct password was entered.
C)
Press key number two "2" to enter to the "delete credential mode", the green light will blink
once.
D)
Enter the last four (4) digits of the credential you want to delete
If the operation was successful, the system will beep twice and the green light will remain ON for 3
seconds.
4 - Replace a credential
A)
Press and hold the Escape key "ESC" until a double beep is heard. The orange light will remain
on to indicate you have entered the programming mode.
B)
Enter the 4 digit security password – factory default:1234. The green light will blink twice if the
correct password was entered.
C)
Press key number three "3" to enter to the "replace credential mode", the green light will
blink once.
D)
Enter the last four (4) digits of the credential you want to replace. If the deletion was successful,
the system will beep twice.
E)
Enter the number of door you want to activate the new credentials on:
Enter “1” to enroll the credentials to unlock door number 1
Enter “2” to enroll the credentials to unlock door number 2
Enter “3” to enroll the credentials to unlock both doors
The green light will blink once and will remain on indicating that the new credential has to be
presented on the reader.
