21
DANGER
The Manufacturer shall not be held responsible for
the non-compliance with the safety and accident
prevention regulations provided for by the laws
and for the non-compliance with what is provided
for in this manual.
Pay attention to this symbol in the instructions
manual.
It shows a possible hazard.
2.1.1 TERMINOLOGY USED
Words of people and of specific situations that may
involve directly the machine an/or the persons in
contact with the machine itself are here below listed.
• USER: The user is the person, the body or the
company who has purchased or rented the ma
-
chine and who intends to use it for the designed
purposes. He shall be responsible for the machine
and for the training of all those working with it.
• DANGEROUS AREA: Any area within and/or near
the machine where the presence of an exposed
person implies a hazard for the safety and the
health of the same.
• EXPOSED PERSON: Any person who is complete
-
ly or in part near a dangerous area.
• OPERATOR: A person who is able to operate, to
carry out the maintenance, to clean and to trans
-
port the machine.
• AUTHORIZED SERVICE CENTER: The authorized
service center is the structure legally authorized
by the Manufacturer that has skilled personnel
able to perform all the service, maintenance and
repair operations, also the most difficult ones,
which are necessary for perfectly maintaining the
machine
2.1.2 GENERAL SAFETY STANDARDS
WARNING
The non-compliance with what is written in «Sec-
tion 2 - Safety and prevention» and the tampering
of the safety devices, if any, relieve the Manufac-
turer from any responsibility in case of accidents
or malfunctions of the machine.
GENERAL WARNING:
- The user commits himself to leave the machine
only with personnel that have been trained and
qualified to this purpose.
- The user shall take all the precautionary measures
so that unauthorized personnel do not use the ma
-
chine.
- The user commits himself to properly instruct his
own personnel on the application and the compli
-
ance with the safety requirements
- The user shall inform the Manufacturer in case
he finds defects or malfunctions of the accident
prevention systems, as well as of any situation of
alleged hazard.
- The operator shall always use the personal protec
-
tion devices provided for by the laws and he shall
perform what is mentioned in this manual.
- The operator shall comply with the instructions as
regards danger and warning pointed out on the
machine.
- The operator shall not perform on his own initia
-
tive operations or interventions that are not up to
him.
- The machine has been tested only with the sup
-
plied accessories. The assembly of equipment of
other brands or any repair may alter the specifica
-
tions of the machine and therefore compromises
the operative safety
- The machine shall not be operated with the guards
that are disassembled or partly damaged.
2.2 SAFETY SIGNALS
The machine was designed by adopting all possible
solutions for the safeguard and safety of the opera
-
tor.
Notwithstanding this, the machine may show some
residual hazards; that is those hazards that were not
possible to eliminate completely under certain con
-
ditions of use.
These potential hazards are indicated on the ma
-
chined with adhesives (pictograms) that briefly point
out the several unsafe and dangerous situations.
WARNING
Keep the adhesive signs clean and replace them
immediately when they are detached or damaged.
By referring to Fig. 11, carefully read what is here
below described and memorize their meaning.
1)
Before starting to operate the machine, carefully
ENGLISH
Содержание F 51
Страница 3: ...3 Fig 2 Fig 3 1 4 3 5 2 Fig 4 750 1200 1380 930 ...
Страница 4: ...4 Fig 5 Fig 6 Fig 7 Fig 8 Fig 9 Fig 10 1 1 1 1 1 2 ...
Страница 5: ...5 Fig 11 1 2 3 4 5 6 ...
