Forster TAP0-EZ1-27, Инструкция по эксплуатации

Страница: 4 / 22

4
Introduction
1 Introduction
1.1 Safety Instructions
Be sure to read and follow all instructions contained in this manual before connecting and
using the automatic feeder.
:
Use the appliance only to feed lambs or kids.
:
Servicing and installation of the automatic feeder has to be restricted to qualified and
authorised service personnel.
:
Read the instruction manual carefully before installing or operating the machine.
To facilitate customer service on the automatic feeders, store the documentation accom-
panying the appliance near to it.
:
The faultless functioning of the automatic feeder requires expert installation, correct
handling, as well as careful care and maintenance.
:
Incorrect data inputs may have serious consequences. Therefore, check the correctness of
all data inputs.
:
The livestock owner is responsible for a regular and scrupulous control of his animals
and the functioning of the appliance. If, for any reason, the system should break down or
some animals should not make use of it, the livestock owner is responsible for choosing
other feeding methods for those animals.
:
The manufacturer accepts no responsibility for damages and their consequences caused
by incorrect installation and operation, improper use, inadequate service and mainte-
nance or false entries.
:
You will find further safety instructions in the following chapters.
1.2 Danger Signs on the Automatic Feeder
CAUTION!
This sign warns you of
rotating parts starting to work automatically.
This sign is located on potential danger areas such as the milk powder
hopper, the milk powder outlet, the mixer as well as the outlet for pow-
der additives on the additive dispenser.
In order to avoid injuries, before carrying out any kind of operation on
above--listed parts, it is imperative to make the automatic feeder current-
less by turning the main switch to position „0/OFF“ or by pulling the
mains plug.
CAUTION!
This sign warns you of electric shocks .
In order to avoid injuries,
before
opening the control-- or the power unit,
it is imperative to make the automatic feeder currentless by turning the
main switch to position „0/OFF“ or by pulling the mains plug.