Forster TAP0-EZ1-27, Инструкция по эксплуатации

Страница: 16 / 22

16
Care and Maintenance of the Automatic Feeder
6 Care and Maintenance of the Automatic Feeder
Always keep the automatic calf feeder clean and dry. Never spray it with
water!
CAUTION! In order to avoid injuries, before carrying out any kind of
operation on the milk powder outlet or on the mixer, it is imperative to
make the automatic feeder currentless by turning the main switch to po-
sition 0/OFF or by pulling the mains plug.
Check the milk powder outlet daily and remove potential incrustations.
Incrustations impair the dosing precision.
In order to avoid injuries, always remove incrustations of the powder
outlet by means of a small piece of wood or similar. Never use your fin-
gers!
Always lay the cable between the pressure tube and the pressure switch
towards the bottom. In case the milk flows into the pressure tube, the
latter will become inoperative.
6.1 After Start--Up
:
The day after start--up, carry out the following:
-- Measure the feed temperature
-- Check the concentration of the milk powder.