62
Running the automatic feeder
6.4.3.1 Basic settings
In the
Settings
menu, you define values for the cleaning temperature, detergent amount and
teat cleaning.
You define basic settings as follows:
1. Choose
> Cleaning > Settings
to go to the
Temperature
submenu.
2. In
Temperature
, you enter the desired temperature. You can enter values between 10°C
and 50°C. The default setting is 45°C.
Note:
Consult the data sheet for the cleaning agent to determine the temperature recom-
mended by the cleaning agent manufacturer and enter this value.
3. In
Detergent
, you enter the desired amount of detergent. You can enter values between 0
ml/l and 25 ml/l. The default setting is 0 ml/l.
Note:
Consult the data sheet for the cleaning agent to determine the amount recommended
by the cleaning agent manufacturer recommends and enter this value.
4. In
Clean teat
, choose
[
yes
] if you want to clean the inside of the teat with rinsing
water. The rinsing water is pumped by the suction hoses and drained via the teat. The de-
fault setting is [
no
].
Note:
Teat cleaning is important step for preventing infections and should therefore should
always be set.
6.4.3.2 Cleaning the mixer
You can clean the mixer automatically (time-controlled) or manually, with or without detergent.
A cleaning cycle consists of:
•
Pre-cleaning
.
•
Main cleaning
with the addition of detergent. Depending on the configuration of your auto-
matic feeder, the main cleaning cycle starts automatically or you must start it yourself. When
it is started manually, you add the cleaning agent manually during the main cleaning cycle.
•
Rinsing
.
6.4.3.2.1 Cleaning the mixer automatically and time-controlled
Note:
You do not have to set automatic mixer cleaning if you set daily cleaning for the heat
exchanger. The mixer is always cleaned when the heat exchanger is cleaned.
Содержание TAK5-CH2-25
