Installation Preparation
6
In your panel, turn OFF the switches
or fuses that feed electricity to the
electric box you will be using to
install your fan. Also turn off the wall
switch that feeds that box.
This fan can be mounted with the down rod (5) in
a flat ceiling or a vaulted ceiling as long as the
angle of the ceiling is under 19 degrees.
This unit cannot be mounted flush on the ceiling.
The fan must be mounted with a minimum of 7 ft.
(2.1 m) clear distance from the blades to the floor
and 30” (0.76 m) clear from any wall or object.
Make sure that your
box is properly
grounded and has
either a green or a
bare wire.
!
WARNING: The electrical outlet box
should be clearly marked “Suitable for
Fan Support”. Failure to do this may
result in serious personal injury.
OFF
OFF
30”
0.76 m
7’
2.1 m
!
WARNING: Failure to disconnect
power supply to the box may result in
serious injury. Turn off circuit breakers
or take out fuses now.
Installing Mounting Bracket
Pass the wires in the electrical box through the
centre of the Mounting Bracket. Install the Mounting
Bracket onto the electrical box using the screws and
washers that came with the box. Please note to put
the opening of the bracket towards the top if
installing on a vaulted ceiling.
