7
DO N
OT TURN O
VEN ON ITS
SIDE
1
. USING A CRANE
Once the oven is uncrated and removed from the tie
down pallet it can be lifted and placed using a crane.
Rigging for placement by a crane requires the use of two
sling straps to be located directly beneth the oven base
and on opposite sides. The riggin st
raps can culminate to
an overhead lifting bar or hook. Each side of the rigging
straps must have tension straps to ensure that the rigging
straps remain spread wide at their bases during the lifting
process.
2
. USING A FORKLIFT
Be sure to use a forklift
rated, and forks the minimum
length, as shown in Appendix A. Fork extensions must be
used so the forks extend through to the opposite side of
the stand. The oven is very top heavy, so be sure to
spread the forks as far apart as possible
3. USING A PALLET
JACK
Once the oven has been removed from the delivery
vehicle, it can easily be moved on flat surfaces using a
pallet jack. If the forks don’t extend across the base, use
4” x 4” posts to bridge the space, placing the forks
underneath for support.
!
!
!
!
!
!
!
!
!
!
LIFTING THE OVEN
UNLOADING AND MOVING
Commercial Oven Series
Installation, Operation & Maintenance
Forno Classico LLC
Phone:
(805) 895
-
2626
53 Aero Camino
Goleta, CA 93117 USA www.fornoclassico.com
