- 20 -
D) Oven door gasket Tab. 8
- Take the gasket out of its seat.
- Clean the seat of the gasket of all
trace of dirt.
- Place the new gasket in its seat (2),
seal the 4 corners with a silicone-based
mastic.
E) Cleaning solenoid valve filters
- Remove the rear panel.
- Remove the water supply pipe.
- Take out the filter and wash it thoroughly.
- Fit it all back together.
TAB. 8
7.2.2 YEARLY MAINTENANCE
This is only to be done by an authorized, skilled technician!
1) Check the seal of the door gasket.
2) Check the seal of the gaskets of the door double-glazing.
3) Check the seal of the lamp-holder glass gasket.
4) Removing and thoroughly cleaning the fan. Open the screen by pushing on the pins and turning them through 90°C.
Remove the fan and clean it thoroughly (left-hand nut).
Fit the screen back on, putting the pins back in their original positions and pushing them
fully in so you hear them click home.
5) It is also recommended to oil the seal of the driving pin passage.
6) Descale the probes, taking care not to swap the wires over.
