FORNI FEM107 Скачать руководство пользователя страница 18

- 18 -

6.11     DRAINING THE BOILER (16)

Caution: After manually draining the boiler you need to switch off the control panel selector on Ø; otherwise, the boiler will
no longer be loaded. Afterwards, switching the control panel back on, turning the selector, the valve will automatically close
and the boiler will start loading.

AUTOMATIC BOILER DR WASHING

After approximately 5 hours of the oven not working, the boiler is automatically drained and rinsed with a second load and
a second draining.
Caution: For the oven to do this, you need to leave the multi-polar switch on and the water shut-off valves upstream from the
oven open.

6.12     MESSAGES AND ALARMS

Service messages

Door : door open

Cont : continuous operation

Hold flashing: waiting to hold

Hold steady: holding in process

End :  cooking has ended.

Alarm messages

H20  :  Not enough water in the boiler. See if the water valve is shut or if there is no water in the supply network.
              To cancel the message and restart loading the boiler, press the clock button (10).

P1 no  :   Chamber temperature sensor broken or disconnected.

P2 no  :   Core probe broken or disconnected (it is still possible to continue using the oven without the core probe).

P3 no  :   Boiler pre-heating probe disconnected.

IMPORTANT: In the case of the last three messages, it is recommended to call a technician to restore normal conditions.

Button 16 makes it possible to drain the boiler manually (only when the oven is not in operation). When the LED
is on, the valve is open, when it is off, the valve is shut.

7.1        CLEANING

CAUTION:

Never wash the outside of the oven with direct or high-pressure jets of water as this would damage the electric components inside.
The oven needs cleaning every day as a matter of hygiene and to prevent its operation getting impaired over time.

7.1.1     CLEANING AFTER COOKING AND AT THE END OF THE DAY

Use a specific degreasing product to clean the oven (do not use corrosive or chlorine-based detergents). It is recommended to
follow the detergent manufacturer’s directions.
1) Carry out the cleaning program as described in par. 6.5.
2) Then open the oven and wipe it with a damp cloth
    or dry it with hot air at 100°C.
3) Take out the filter and the removable parts and wash them
     fully open.
4) Rinse the oven and accessories with water, possibly
    using the external handshower (optional on all
    versions).
5) Dust the door gasket regularly with talcum powder,
     at least once a week.
6) See that the outlet is cleaned regularly and
      check it is clear.

FEM207-FEM207SC

7. CLEANING AND MAINTENANCE

Содержание FEM107






















Отзывы: