Maintenance manual | Electro-pneumatic sliding dampers
www.formula-air.com
13
IMPORTANT :
Make sure to use adequate support on the pipes on either side of the sliding damper to reduce
pressure on the sliding damper body and blade.
Recommended mounting in horizontal ducting is to have the blade open downwards, and have the sliding damper
body supported with suspension rings at most at 150 mm from either side of the sliding damper edges.
Step 2 : Connect the compressed air hose and the electrical power to the solenoid valve.
Step 3 : Adjust the opening and closing speed of the sliding damper by turning the screw on the air regulators, on the
side of the solenoid valve.
NOTE
: only use oil and water free, dry compressed air for proper functioning.
Attach together
with pull rings
Attach together
with pull rings
Air hose connection
Air regulators
≈ 150 cm
≈ 150 cm
Suspension rings
