Maintenance manual | Electro-pneumatic sliding dampers
www.formula-air.com
12
3.5.3 Electrical connection of the reed sensor
3.6.
Mounting the cover house on the sliding damper body (optional)
Step 1
:
Unscrew the bolt from the damper body where the cover house goes.
Step 2 :
Slide the cover over the sliding damper body.
Step 3 :
Use the bolt unscrewed in Step 1 to attach it to the sliding damper.
3.7.
Placing the sliding damper in an installation
Step 1 : Attach the sliding damper to the ducting, using suitable rings. Seals can be added to the rings for extra air-
tightness.