formlabs Form Cure L, Инструкция по установке и использованию

Страница: 10 / 40

8
2 Introduction
2.1 Intended use
The Form Cure L post-cures 3D printed parts with a combination of heat and light. The
final performance characteristics of cured photopolymer resin may vary according to your
compliance with the instructions for use, application, operating conditions, material combined
with, end use, or other factors.
In some cases, the additive manufacturing process may inherently result in variable
performance characteristics between manufacturing runs or within a specific part.
Such variances may not be apparent and may result in unexpected defects in
additively fabricated parts.
You shall independently verify the suitability of additive manufacturing,
stereolithography (SLA), the Form Cure L, and any specific designs or materials
employed for the application and intended purpose before use. In no event shall
Formlabs be liable for any loss, death, or bodily injury that you suffer, or that you
cause to any third party, in connection with your use of Formlabs products. To the
fullest extent legally permitted Formlabs EXPRESSLY DISCLAIMS ANY IMPLIED OR
EXPLICIT WARRANTY OF FITNESS for a particular usage, the particular nature and
circumstances of said usage being unforeseen and unforeseeable to Formlabs.
Formlabs is not a manufacturer of medical devices. Formlabs provides tools and
materials that may be used in many applications, but makes no claims as to the safety
or effectiveness of any specific devices made using Formlabs products. Certain
Formlabs products, such as those commonly known in the industry as “biocompatible”
materials, have been engineered to comply with relevant industry standards. The
specific standards and most relevant technical specifications may be identified
within the technical data sheets and have been tested according to relevant testing
protocols for those standards and specifications. Biocompatible materials are a
speciality product, developed for use by medical professionals, and should be used in
accordance with the instructions for use.
Do not modify. The Form Cure L is intended for use as-is. Modifying the machine
without explicit approval and directions from Formlabs or a certified service provider will
void your warranty, and could potentially damage the machine and cause bodily harm.
NOTICE
WARNING
WARNING
WARNING