16
_________________________________________________________________________________
5 SERVICING AND MAINTENANCE
The machine should be covered after use with the protective
cover so that the rubber parts are not damaged by external
light, sun and heat sources!
To begin all service the power plug must be removed from the power
outlet in the wall (pull only on the plug, not the
p
ower cord!)
Then:
Open or unscrew the electronic convering for
maintenance work.
Replace the fine-wire fuse in the fuse holder
(miniature fuse 5 x 20 mm, 230 VAC / 800 mA or 115
VAC / 1.6 A).
Replacement fuse is provided into the rocker switch
black with on/off switch and fuse holder.
Cleaning and maintenance work.
Damage to the power cable (to be replaced
immediately)
Short circuit or other electical faults (an authorised
representative or technician should be consulted)
Only original spare parts should be used. For maintenance and
repair, contact your local dealer. Not properly carrying out
repairs or maintenance may lead to injury or the sealer not
working properly!
5.1 Cleaning
The conveyor belt should be cleaned externally from time to time with a roller
cleaning agent, (as for all printers) and a lint-free cloth.
Performing these cleanings help
s
to ensure good adhesion and
proper transportation of the envelope!
MyBinding.com
5500 NE Moore Court
Hillsboro, OR 97124
Toll Free: 1-800-944-4573
Local: 503-640-5920
