Processing a Basic Mail Set
A basic mail set consists of documents from one or more document feeders. This set is
inserted into an envelope.
Before you start, make sure you have read the
Introduction on processing mail sets
on
page 29.
1.
From the home menu, press the
[New job]
button.
2.
Choose
[Automatic]
to start an Automatic job.
3.
Load the documents and envelopes into the feeders.
4.
Press the
[1x]
test run button to create one mail set and follow the instructions on
screen.
After a successful test run, it is possible to use the
[Save]
button
to save the settings of the Automatic job to a new job.
5.
Press the
[start]
button to start the mail set production.
The system stops producing mail sets when one of the feeders is empty or the
[stop]
button
is pressed.
30
| Page 30 | jan-06-2012 13:58 |
4
En
glish
