Side Guides
To adjust the side guides it is best to remove the document feed tray from the feeder as
follows:
1.
Push handle
A
downwards.
2.
Lift the document feed tray upwards to unhook it and then pull it out from the feeder.
3.
Loosen the knob
B
half a turn.
4.
Grab the side guides in the middle and push them apart as far as possible.
5.
Put a small stack of documents between the side guides.
6.
Grab the side guides in the middle and push them towards the documents.The space
between the side guides and the documents should be such that the documents have
just enough play to move freely.
7.
Re-tighten knob
B
.
8.
Remove the stack of documents.
9.
Replace the document feed tray (see
Installing document feeders
on page 10).
2
En
glish
15
| Page 15 | jan-06-2012 13:58 |
