3.
Press the
[Run sheet]
button.The BCR settings screen appears.
4.
In the BCR settings screen, confirm that all settings are read correctly.
Note that this screen consists of two parts. Use the arrows at the bottom of the screen
to navigate between the two parts of this screen.
5.
Press the
[Back]
button to leave the BCR settings menu.
6.
Press the
[Save]
button to save the BCR settings that were read from the configuration
sheet.
Saving these settings will change the barcode definition for ALL
jobs where reading is used.
7
En
glish
75
| Page 75 | jan-06-2012 13:58 |