forest river 2014 Flagstaff, Руководство пользователя

Страница: 13 / 64

— 13 —
Tent Camper Owner’s Manual
Note: Always ventilate and dry tent (with bows and braces in place), as soon as possible, after each exposure to
moisture. Mildew is always the result of negligence.
Note: To avoid possible damage to the finish, do not use solvents, rubbing compound or abrasive cleaner or cloth,
to clean your vinyl tent.
Note: Do not use hand-held high pressure spray devises such as those at car washes, as they will damage the tape
and painted surfaces on the camper.
For heavily soiled spots, a very soft bristled brush can be used. Before using any cleaner or chemical on the camper,
test a small area first. After washing, rinse the entire camper thoroughly to remove any soap residue, as it can stain
the paint. Use towels or a chamois to dry the camper.
To avoid moisture from entering through breaks, possibly causing problems with interior walls and components,
damage to fiberglass or aluminum should be taken care of immediately. Cover breaks in the sidewall with plastic,
sealing the edges with tape until proper repairs can be made.
T
enT
V
inyL
m
ainTenanCe
All vinyl tents need to be dampened with water, one or more times, to seal the needle holes. Your tent may leak the
first time it gets wet. This is normal. The tent is sewn with special thread which expands when wet and helps to seal
the needle holes.
Seal all seams before the first trip, and each year thereafter to prevent water damage to the interior of your camper.
It’s a good idea to include a wax candle in your field maintenance kit, to seal small leaks which may develop while
you are camping. (If you use a candle for emergency lighting, be sure to observe proper fire safety precaution. Have
your camper fire extinguisher nearby, and be sure you and your guests know how to operate it.)
Your plastic windows have a -20° cold crack. Do not crank your tent up to the maximum height in extremely cold
weather, (0° ). Doing so could shatter your windows.
To avoid damage from mold or mildew, allow a wet tent to dry completely before closing the camper. If you must
close the camper with the tent wet, be sure to protect all the cushions and drapes from dampness by storing them
in a dry, protected area.
C
rank
-u
p
L
ifT
s
ysTem
To help protect your Limited Warranty,
you must perform general maintenance
and regular inspections. Failure to pro-
vide proper service maintenance is easily
recognized, as it is reflected in the condi-
tion of your camper.
P
ower
-w
inch
S
yStem
Refer to your power winch owners manual for
operating and maintenance information.
i
nSPect and
S
ervice
y
early
1. Clean and recoat lifter posts external-
ly, with a rust prohibitive, non-drying
lubricant.
2. Annually grease zerks on front, bottom
and top of master tube.
3. Lubricate springs annually by raising the roof to the UP position. At each segment of the telescoping post,
lubricate with 30 weight oil, taking care to inject the oil into the opening between the posts. To help avoid tent
damage, immediately remove any excess oil on the external portion of the post.