CLIMATE CONTROL SYSTEM
Your vehicle is equipped with an automatic temperature control (ATC)
system designed to maintain a selected temperature with a combination
A/C-Heater system.
Air conditioning (A/C) and heater controls
The control for your air conditioning and heater system is located at the
center of the instrument panel below the radio and will operate in the
KEY-ON position. Your air conditioner and heater will heat and/or cool
your vehicle interior depending on the function position and temperature
you select. The mode selector knob allows you to select heating or
cooling, and determine where the air will be directed. The temperature
control knob setting determines the desired interior temperature of the
vehicle. To turn your air conditioner or heater system on, select any
position except OFF. This will turn the fan on and allows air flow into
the vehicle. To turn your air conditioner or heater system off, select OFF.
This will turn the fan off and stop airflow from coming into the vehicle.
Recirculation switch
The recirculation switch is located
at the center of the instrument
panel just right of the radio. It
allows switching from outside air to
recirculated air in Panel,
Panel/Floor, and Floor modes. The recirculation switch operates for five
minutes, then shuts off. If more recirculation operation is desired, press
the control again. Note that in MAX A/C and A/C modes, the function is
automatic (stays in recirculation mode) and cannot be switched off. A
table of recirculation switch operation follows.
OFF
A/C
MAX
A/C
Controls and features
9
