1. Park the Ranger Electric Vehicle. The vehicle’s charge inlet is at the
right front of the vehicle in the grille, next to the right headlamp.
2. Place the gearshift lever in P
(Park) and set the parking brake.
3. Turn the “ignition” to LOCK and remove the key from the “ignition.”
4. Open the charge inlet access door
in the front grille. The door is
hinged toward the right headlamp
and opens in the same manner as
the fuel filler door.
5. Pick up the PCS connector and
position it so that the release button
is facing upwards.
6. Align the PCS connector to the charge inlet, fully insert the connector
and make sure that the tabs on both sides of the connector engage the
slots in the inlet.
7. Gently push the connector down,
toward the bumper, until you hear a
click. The click means that the
connector is locked into the inlet.
Charging
14
