Radio wiring and routing
Power connections should be made directly to the battery and fused as
close to the battery as possible.
On the Ranger Electric Vehicle make the connections as follows:
•
For the +12V circuit, connect a
weatherproof fuse holder to the
end of the 10 gauge circuit pigtail
that is taped into the harness at
the auxiliary battery positive
terminal. Route and secure the
wire as close as possible to the
vehicle body from the battery to
the transceiver. Pass the wire
from the engine to passengers
compartment through a hole in
the accelerator’s cable hole plug.
Use care when routing this wire to
avoid chafing or pinching. Seal the
hole to prevent moisture intrusion
into the passenger compartment.
Accessories
58
