POWER STEERING FLUID LEVEL
Check the power steering fluid at
least twice a year. If adding fluid is
necessary, use only MERCON
t
ATF.
1. Turn the “ignition” ON.
2. Turn the steering wheel left and
right to the steering stops several
times. Do not keep wheel at steering
stops longer than 5 seconds.
3. Turn the “ignition” OFF.
4. Check the fluid level. It should be
between the MAX and MIN lines on
the reservoir. Do not add fluid above
the MAX level.
5. If the fluid is low, add fluid.
BRAKE FLUID
Checking and adding brake fluid
Brake fluid should be checked and
refilled as needed at least once each
year:
1. Check the reservoir cap before
removal to prevent dirt or water
from entering the reservoir.
2. Visually inspect the fluid level.
3. If necessary, add brake fluid until the level reaches MAX. Do not fill
above this line.
4. Use only a DOT 3 brake fluid certified to meet Ford specifications.
Refer to
Lubricant specifications
in the
Capacities and specifications
chapter.
Brake fluid is toxic.
Maintenance and care
50
