P/N: 4FA020-010
© 2008 Vortech Engineering, Inc.
All Rights Reserved, Intl. Copr. Secured
25MAR08 v4.0(86-93 5.0 Mus (4FA v4.0))
SPECIAL NOTICE CONCERNING THE
MSD IGNITION SYSTEM
The MSD Boost Timing Master, manufactured by Autotronic
Controls Corporation, that may be included in this kit,
is serviced exclusively by the manufacturer. Autotronic
Controls Corporation warrants this product to be free from
defects in material and workmanship under normal use
and if properly installed for a period of one (1) year from
the date of purchase. In case of malfunction, this unit will
be repaired free of charge according to the terms of the
warranty. If found to be defective as mentioned above, it
will be repaired or replaced if returned prepaid along with
proof of purchase. This shall constitute the sole remedy of
the purchaser and the sole liability of Autotronic Controls
Corporation and/or Vortech Engineering, Inc. To the extent
permitted by law, the foregoing is exclusive and in lieu of all
other warranties or representations whether expressed or
implied, including any implied warranty of merchantability
or fitness. In no event shall Autotronic Controls Corporation
and/or Vortech Engineering, Inc. be liable for labor charges,
special or consequential damages.
When returning this unit for service, proof of purchase must
be supplied for warranty verification. After the warranty period
has expired, repair service is charged between a minimum
and maximum charge. In either case, please send the unit
pre-paid with proof of purchase to the attention of:
Autotronic Controls Corporation
Customer Service Department
12120 Esther Lama
Suite #114
El Paso, Texas, 79936
Phone: (915) 855-7123
Fax: (915) 857-3344
www.msdignition.com
The repaired unit will be returned as soon as possible after
receipt, COD for any charges. Be sure you include a detailed
account of any problems experienced, the type of vehicle
and any modifications.
Should you have any technical or installation questions
regarding this unit, contact Vortech Engineering, Inc. directly
at (805) 247-0226.
xiii
