•
The driver’s safety belt is unbuckled.
•
The headlamp control is in the
position.
While the design allows you to deactivate your Belt-Minder
威
, this
system is designed to improve your chances of being safely
belted and surviving an accident. We recommend you leave the
Belt-Minder
威
system activated for yourself and others who may use the
vehicle. To reduce the risk of injury, do not deactivate/activate the
Belt-Minder
威
feature while driving the vehicle.
Belt-Minder
威
activation and deactivation procedure
1. Turn the ignition switch to the RUN (or ON) position. (DO NOT
START THE ENGINE.)
2. Wait until the safety belt warning light turns off. (Approximately 1–2
minutes.)
•
Steps 3–5 must be completed within 60 seconds or the procedure will
have to be repeated.
3. Buckle then unbuckle the safety belt three times, ending with the
safety belt unbuckled. This can be done before or during Belt-Minder
威
warning activation.
4. Turn on the parklamps/headlamps, turn off the parklamps/headlamps.
5. Buckle then unbuckle the safety belt three times, ending with the
safety belt unbuckled.
•
After step 5 the safety belt warning light will be turned on for three
seconds.
6. Within seven seconds of the safety belt warning light turning off,
buckle then unbuckle the safety belt.
•
This will disable Belt-Minder
威
if it is currently enabled, or enable
Belt-Minder
威
if it is currently disabled.
7. Confirmation of disabling Belt-Minder
威
is provided by the safety belt
warning light flashing four times per second for three seconds.
8. Confirmation of enabling Belt-Minder
威
is provided by:
•
The safety belt warning light flashing four times per second for three
seconds.
•
Followed by three seconds with the safety belt warning light off.
•
Once again, the safety belt warning light will flash four times per
second for three seconds.
2008 F-650/750
(f67)
Supplement
USA
(fus)
Seating and Safety Restraints
77