![Ford F-650 2008 Скачать руководство пользователя страница 126](http://html1.mh-extra.com/html/ford/f-650-2008/f-650-2008_user-manual_2318311126.webp)
These ranges can also be used to provide additional steps between
transmission shifts when driving on steep grades and/or fuel economy
may be factors.
Note:
Do not shift between ranges when the speed control is on.
Never shift a two-speed axle when descending a steep grade as
this may cause loss of vehicle control and result in personal injury.
Axle shifting
Manual transmissions:
•
To downshift,
select the next lower gear, release and depress the
accelerator pedal rapidly, or while holding the accelerator pedal down,
release and engage the clutch rapidly.
Note:
The clutch method is
recommended when driving at slower speeds.
•
To upshift,
keep the accelerator pedal down, select the next higher
gear, release the accelerator and pause until the axle upshifts.
Note:
De-clutch for smoother axle upshifts when driving at slower speeds.
Automatic transmissions:
•
Use LO range for when you drive
a fully loaded vehicle on a severe
grade or in congested traffic. To
activate LO range, press the
upper portion of the switch.
•
Use HI range for all normal
driving conditions with a lightly
loaded or partially loaded vehicle.
To activate HI range, press the
lower portion of the switch.
Note:
You cannot split-shift with an automatic transmission. Also,
downshifting above 40 mph (64 km/h) may result in transmission or axle
damage.
Shifting the axle from LO to HI range - vehicle stopped
Place the transmission in N (Neutral), then press the lower part of the
switch.
Shifting the axle from LO to HI range - vehicle moving
Accelerate to approximately 35 mph (56 km/h), press the lower part of
the switch while the transmission is in N (Neutral), then release and
apply the accelerator.
LOW
2SPD
2008 F-650/750
(f67)
Supplement
USA
(fus)
Driving
126