Ford 2012 Mustang Скачать руководство пользователя

Страница: 80 / 350

Using speed controls

The speed controls are located on the steering wheel. The following
buttons work with speed control:

Base controls

Optional controls

ON/OFF:

Press to turn the system on or off.

SET (+):

Press to set a speed or to increase a set speed.

SET (–):

Press to decrease a set speed.

RES / RESUME:

Press to resume a set speed.

Setting speed control

The set speed control:

1. Press and release ON.

2. Accelerate to the desired speed.

3. Press and release SET (+).

4. Take your foot off the accelerator pedal.

5. The indicator

light on the instrument cluster will turn on.

Note:

•

Vehicle speed may vary momentarily when driving up and down a
steep hill.

•

If the vehicle speed increases above the set speed on a downhill, you
may want to apply the brakes to reduce the speed.

•

If the vehicle speed decreases more than 10 mph (16 km/h) below
your set speed on an uphill, your speed control will disengage.

RES

SET

OFF

RESUME

OFF ON

SET

Driver Controls

2012 05+ Mustang

(197)

Owners Guide, 3rd Printing
USA

(fus)

Содержание 2012 Mustang































































































































































































































































































































































Результаты поиска

Содержание 2012 Mustang

Отзывы:

Похожие инструкции для 2012 Mustang

Бренды по названию

Популярные бренды

Ford 2012 Mustang, Руководство пользователя

Результаты поиска

Содержание 2012 Mustang

Отзывы:

Похожие инструкции для 2012 Mustang

Бренды по названию

Популярные бренды