Ford 2012 Mustang Скачать руководство пользователя

Страница: 91 / 350

Note:

The latch handles must be

pulled downward fully to allow the
latch to fully rotate into the open
position.

3. Unclamp the top from the
windshield header by pulling each
latch handle down and then rotating
the latch to the rear until it clears
the header.

Note:

If the top has not been lowered for some time and sticks to the

windshield header, push the front of the top up slightly with your hand
to loosen it.

4. Press the convertible top switch
on the overhead console and hold
until the windows are completely
down and the top is completely
stored.

Driver Controls

2012 05+ Mustang

(197)

Owners Guide, 3rd Printing
USA

(fus)

Содержание 2012 Mustang































































































































































































































































































































































Результаты поиска

Содержание 2012 Mustang

Отзывы:

Похожие инструкции для 2012 Mustang

Бренды по названию

Популярные бренды

Ford 2012 Mustang, Руководство пользователя

Результаты поиска

Содержание 2012 Mustang

Отзывы:

Похожие инструкции для 2012 Mustang

Бренды по названию

Популярные бренды