Ford 2012 Mustang Скачать руководство пользователя

Страница: 312 / 350

•

Move vehicles at least 25 feet (8 m) every 15 days to lubricate
working parts and prevent corrosion.

Removing vehicle from storage

When your vehicle is ready to come out of storage, do the following:

•

Wash your vehicle to remove any dirt or grease film build-up on
window surfaces.

•

Check windshield wipers for any deterioration.

•

Check under the hood for any foreign material that may have collected
during storage (mice/squirrel nests).

•

Check the exhaust for any foreign material that may have collected
during storage.

•

Check tire pressures and set tire inflation per the Tire Label.

•

Check brake pedal operation. Drive the vehicle 15 ft (4.5 meters) back
and forth to remove rust build-up.

•

Check fluid levels (including coolant, oil and gas) to make sure there
are no leaks, and fluids are at recommended levels.

•

If the battery was removed, clean the battery cable ends and inspect.

Contact your authorized dealer if you have any concerns or issues.

MOTORCRAFT PART NUMBERS

Component

3.7L V6 engine

5.0L V8 engine

Air filter element

FA-1897

Battery

BXT-96R-590

Oil filter

FL-500-S

Spark plugs

Cabin air filter

FP53

Windshield wiper
blade

WW-2201-PF (driver side)

WW-2001-PF (passenger side)

For spark plug replacement, see your authorized dealer. Refer to

scheduled maintenance information

for the appropriate intervals for

changing the spark plugs.

Replace the spark plugs with ones that meet Ford material and
design specifications for your vehicle, such as Motorcraft

威

equivalent replacement parts. The customer warranty may be void
for any damage to the engine if such spark plugs are not used.

For battery replacement of the Mustang Boss 302, use Motorcraft

威

battery BXT-96R-500.

Maintenance and Specifications

312

2012 05+ Mustang

(197)

Owners Guide, 3rd Printing
USA

(fus)

Содержание 2012 Mustang































































































































































































































































































































































Результаты поиска

Содержание 2012 Mustang

Отзывы:

Похожие инструкции для 2012 Mustang

Бренды по названию

Популярные бренды

Ford 2012 Mustang, Руководство пользователя

Результаты поиска

Содержание 2012 Mustang

Отзывы:

Похожие инструкции для 2012 Mustang

Бренды по названию

Популярные бренды